Minggu, 19 Mei 2013

Basic Principles:1 Automatic synchronizing of a generator consists of electrically �coupling� the generator output to another supply of electrical power and operating the generator such that its output provides to the opposite supply.2 Automatic synchronizing can encompass a large variety of conditions any suchs: a) Two or more equal or similar-sized turbines which, whenparalleled to one another,
Read More..

Jumat, 17 Mei 2013

TDA2822 is a monolithic integrated audio amplifier can be configured in stereo mode or bridge (BTL). The IC has low crossover distortion, low quiescent current and is available in 16 pin DIP package power. The TDA2822 may be operated from a supply voltage range of 3V to 15V. The main applications are headphone amplifier TDA2822, portable audio, radio, mini headphones, preamp etc. The IC can
Read More..

Selasa, 14 Mei 2013


This is the circuit diagram of a simple electronic combination lock using IC LS 7220.This circuit can be used to activate a relay for controlling (on & off) any device when a preset combination of 4 digits are pressed.The circuit can be operated from 5V to 12V.
Read More..

Senin, 13 Mei 2013


This is the circuit of a low power LED night lamp that will automatically switch OFF at day time. The CMOS timer IC TS555CN is wired as a square wave generator operating at around 5Hz.The output voltage from the IC1 is doubled using the combination of capacitor C2 and diode D2 in order to drive the LED. The LED can be a bright white LED. At day time the resistance of LDR drops to few K Ohms and
Read More..
The circuit is nothing but two LEDs (D1 and D2), whose status are controlled by the temperature of the surroundings. The famous IC LM35 is used as the temperature sensor here. Output of LM35 increases by 10mV per degree rise in temperature. Output of LM35 is connected to the non inverting input of the opamp CA3130.The inverting input of the same opamp can be given with the required reference
Read More..
Connecting this circuit to the battery of your vehicle, you will always know at a glance the approximate voltage available.An indication of battery voltage is useful to the motorist for monitoring the batterys capacity to deliver current, and as a check on the efficiency of the dynamo or alternator.Threshold voltages of the LEDs are set by means of two Zener Diodes (D6 & D10) plus two further
Read More..

Minggu, 05 Mei 2013

This amplifier was designed to be self-contained in a small loudspeaker box. It can be feed by Walkman, Mini-Disc, iPod and CD players, computers and similar devices fitted with line or headphone output. Of course, in most cases you will have to make two boxes to obtain stereo.Circuit Diagram:Parts:P1 = 10KR1 = 33KR2 = 33KR3 = 33RR4 = 15KR5 = 1KR6 = 1KR7 = 680RR8 = 120R-1/
Read More..